Medical furniture, healthcare furniture, hand therapy thermoplastics, hospital beds, rehabilitation WS Medical New Zealand

"My husband has chronic MS and has been using a Deluxe Air Comfort reclining chair for about a year. I care for him at home and prior to purchasing this product he was confined to bed and its incorporated pressure care system 24 hours per day. Now using the Air Comfort Deluxe Day Chair he spends around 8 hours a day with me in the living room and kitchen area and on sunny days I can take him out on to the deck. He is very comfortable and although susceptible to pressure sores no problems have developed, this product has changed our lives significantly."

 

Hospital Beds

Vienna - MC100

  • Vienna hospital bed - click here to enlargeGerman built Dewert electronics, motors and actuators for maximum reliability and performance
  • Meets the rigorous Australian standards
  • Payload of 225kg
  • Foot operated central locking system with stylised plastic moulded 5" castors
  • 4 x section bed including simultaneous (profiling) back section and knee break operation to prevent the patient sliding down the bed
  • Swipe card security system to immobilise the controls if required
  • Excellent high/low capability (265mm low, 650mm high)
  • Easily operated bed extension (2385mm extended)
  • Vienna 4 x section hospital bed - click here to enlarge Length 2160mm and width 965mm
  • Backrest 0 to 80 degrees
  • Knee break 0 to 45 degrees with a further manual adjustment option
  • Emergency battery backup system
  • Excellent clearance underneath the bed for hoist access and safety bar to prevent damaging the control unit
  • Maximum attention to the avoidance of potential skin tear areas including areas accessed by staff when making up the bed
  • ABS plastics used throughout for an appealing appearance, ease of cleaning, strength and flexibility
  • Lightweight removable ABS head and footboards with size and wood veneer options
  • Ventilated clip on/off mattress panels for cleaning and maintenance purposes
  • Protective devices at both ends of the bed to protect the walls and doors
  • 10 year warranty on the bed frame and a 2 year warranty on the electrical equipment and castors

Milan hospital bedMilan - MC200

Is the same in all respects as the Vienna above except:

  • 2 x section bed
  • No leg rest extension
  • No battery back up
Options
  • Milan 2 x section hospital bed - click here to enlargeBed side rails, a choice of either vertical or the pinch free horizontal
  • Self help pole
  • I.V. pole
  • Bed side table
  • Overbed table
Mattress
  • Multi level foam pressure care mattress with extra support in the sacral-coxygeal area and a high density pressure care foam on the top level
  • Designed with cut outs to accommodate the beds features
  • Carflex (4 directional pressure relieving stretch material) cover with zip access. Carflex sides to allow fluids to run off.
Vienna High / Low Capability

Click here to enlarge
Click here to enlarge

Click images to enlarge


Vienna 225mm Bed Extension


Click here to enlarge
 
Click images to enlarge
 

Vienna Bed Settings

Click here to enlarge
Click here to enlarge
Click here to enlarge
Click here to enlarge
Click here to enlarge
Click images to enlarge

Vienna and Milan Hospital Beds - Options


MC10SRH:
Siderail Horizontal
MC10SH:
Self Help Pole
MC10FBS:
Small Footboard
  • Siderails MC10SR
  • Siderail Vertical MC10SRV
  • I.V. Pole MC10IV
  • Standard mattress MC10MS
  • Pressure care mattress MC10MSP
  • Mattress bolster MC10MB
  • Concave mattressMC10MC (removable)
  • Central locking castors:
    • ø100mm MC10CL4
    • ø125mm MC10CL4
  • Colour options for MC100: Antique White or Cool Grey
  • Colour options for MC200: Antique White

My Comfort - "lie down, you can tell the difference"